a docker swarm

4 files changed, 454 insertions, 0 deletions

diff --git a/playbooks/roles/outbound/tasks/main.yml b/playbooks/roles/outbound/tasks/main.yml
new file mode 100644
index 0000000..84070d6
--- /dev/null
+++ b/playbooks/roles/outbound/tasks/main.yml
@@ -0,0 +1,28 @@
+---
+
+- name: Build headscale compose dirs
+  ansible.builtin.file:
+    state: directory
+    dest: '/etc/docker/compose/headscale/{{ item.path }}'
+  with_filetree: '../templates'
+  when: item.state == 'directory'
+
+- name: Build headscale compose files
+  ansible.builtin.template:
+    src: '{{ item.src }}'
+    dest: '/etc/docker/compose/headscale/{{ item.path }}'
+  with_filetree: '../templates'
+  when: item.state == 'file'
+
+- name: Daemon-reload and enable headscale
+  ansible.builtin.systemd_service:
+    state: started
+    enabled: true
+    daemon_reload: true
+    name: docker-compose@headscale
+
+- name: Perform rollout incase daemon already started
+  ansible.builtin.shell:
+    cmd: /usr/local/bin/docker-rollout rollout -f docker-compose.yml headscale
+    chdir: /etc/docker/compose/headscale
+
diff --git a/playbooks/roles/outbound/templates/config/config.yaml b/playbooks/roles/outbound/templates/config/config.yaml
new file mode 100644
index 0000000..6d3fdae
--- /dev/null
+++ b/playbooks/roles/outbound/templates/config/config.yaml
@@ -0,0 +1,387 @@
+---
+
+server_url: '{{ headscale_url }}'
+listen_addr: '{{ headscale_listen_addr }}'
+
+# Address to listen to /metrics, you may want
+# to keep this endpoint private to your internal
+# network
+#
+metrics_listen_addr: 127.0.0.1:9090
+
+# Address to listen for gRPC.
+# gRPC is used for controlling a headscale server
+# remotely with the CLI
+# Note: Remote access _only_ works if you have
+# valid certificates.
+#
+# For production:
+# grpc_listen_addr: 0.0.0.0:50443
+grpc_listen_addr: 127.0.0.1:50443
+
+# Allow the gRPC admin interface to run in INSECURE
+# mode. This is not recommended as the traffic will
+# be unencrypted. Only enable if you know what you
+# are doing.
+grpc_allow_insecure: false
+
+# The Noise section includes specific configuration for the
+# TS2021 Noise protocol
+noise:
+  # The Noise private key is used to encrypt the
+  # traffic between headscale and Tailscale clients when
+  # using the new Noise-based protocol.
+  private_key_path: /var/lib/headscale/noise_private.key
+
+# List of IP prefixes to allocate tailaddresses from.
+# Each prefix consists of either an IPv4 or IPv6 address,
+# and the associated prefix length, delimited by a slash.
+# It must be within IP ranges supported by the Tailscale
+# client - i.e., subnets of 100.64.0.0/10 and fd7a:115c:a1e0::/48.
+# See below:
+# IPv6: https://github.com/tailscale/tailscale/blob/22ebb25e833264f58d7c3f534a8b166894a89536/net/tsaddr/tsaddr.go#LL81C52-L81C71
+# IPv4: https://github.com/tailscale/tailscale/blob/22ebb25e833264f58d7c3f534a8b166894a89536/net/tsaddr/tsaddr.go#L33
+# Any other range is NOT supported, and it will cause unexpected issues.
+prefixes:
+  v4: 100.64.0.0/10
+  v6: fd7a:115c:a1e0::/48
+
+  # Strategy used for allocation of IPs to nodes, available options:
+  # - sequential (default): assigns the next free IP from the previous given IP.
+  # - random: assigns the next free IP from a pseudo-random IP generator (crypto/rand).
+  allocation: sequential
+
+# DERP is a relay system that Tailscale uses when a direct
+# connection cannot be established.
+# https://tailscale.com/blog/how-tailscale-works/#encrypted-tcp-relays-derp
+#
+# headscale needs a list of DERP servers that can be presented
+# to the clients.
+derp:
+  server:
+    # If enabled, runs the embedded DERP server and merges it into the rest of the DERP config
+    # The Headscale server_url defined above MUST be using https, DERP requires TLS to be in place
+    enabled: false
+
+    # Region ID to use for the embedded DERP server.
+    # The local DERP prevails if the region ID collides with other region ID coming from
+    # the regular DERP config.
+    region_id: 999
+
+    # Region code and name are displayed in the Tailscale UI to identify a DERP region
+    region_code: "headscale"
+    region_name: "Headscale Embedded DERP"
+
+    # Listens over UDP at the configured address for STUN connections - to help with NAT traversal.
+    # When the embedded DERP server is enabled stun_listen_addr MUST be defined.
+    #
+    # For more details on how this works, check this great article: https://tailscale.com/blog/how-tailscale-works/
+    stun_listen_addr: "0.0.0.0:3478"
+
+    # Private key used to encrypt the traffic between headscale DERP
+    # and Tailscale clients.
+    # The private key file will be autogenerated if it's missing.
+    #
+    private_key_path: /var/lib/headscale/derp_server_private.key
+
+    # This flag can be used, so the DERP map entry for the embedded DERP server is not written automatically,
+    # it enables the creation of your very own DERP map entry using a locally available file with the parameter DERP.paths
+    # If you enable the DERP server and set this to false, it is required to add the DERP server to the DERP map using DERP.paths
+    automatically_add_embedded_derp_region: true
+
+    # For better connection stability (especially when using an Exit-Node and DNS is not working),
+    # it is possible to optionally add the public IPv4 and IPv6 address to the Derp-Map using:
+    ipv4: 1.2.3.4
+    ipv6: 2001:db8::1
+
+  # List of externally available DERP maps encoded in JSON
+  urls:
+    - https://controlplane.tailscale.com/derpmap/default
+
+  # Locally available DERP map files encoded in YAML
+  #
+  # This option is mostly interesting for people hosting
+  # their own DERP servers:
+  # https://tailscale.com/kb/1118/custom-derp-servers/
+  #
+  # paths:
+  #   - /etc/headscale/derp-example.yaml
+  paths: []
+
+  # If enabled, a worker will be set up to periodically
+  # refresh the given sources and update the derpmap
+  # will be set up.
+  auto_update_enabled: true
+
+  # How often should we check for DERP updates?
+  update_frequency: 24h
+
+# Disables the automatic check for headscale updates on startup
+disable_check_updates: false
+
+# Time before an inactive ephemeral node is deleted?
+ephemeral_node_inactivity_timeout: 30m
+
+database:
+  # Database type. Available options: sqlite, postgres
+  # Please note that using Postgres is highly discouraged as it is only supported for legacy reasons.
+  # All new development, testing and optimisations are done with SQLite in mind.
+  type: sqlite
+
+  # Enable debug mode. This setting requires the log.level to be set to "debug" or "trace".
+  debug: false
+
+  # GORM configuration settings.
+  gorm:
+    # Enable prepared statements.
+    prepare_stmt: true
+
+    # Enable parameterized queries.
+    parameterized_queries: true
+
+    # Skip logging "record not found" errors.
+    skip_err_record_not_found: true
+
+    # Threshold for slow queries in milliseconds.
+    slow_threshold: 1000
+
+  # SQLite config
+  sqlite:
+    path: /var/lib/headscale/db.sqlite
+
+    # Enable WAL mode for SQLite. This is recommended for production environments.
+    # https://www.sqlite.org/wal.html
+    write_ahead_log: true
+
+    # Maximum number of WAL file frames before the WAL file is automatically checkpointed.
+    # https://www.sqlite.org/c3ref/wal_autocheckpoint.html
+    # Set to 0 to disable automatic checkpointing.
+    wal_autocheckpoint: 1000
+
+  # # Postgres config
+  # Please note that using Postgres is highly discouraged as it is only supported for legacy reasons.
+  # See database.type for more information.
+  # postgres:
+  #   # If using a Unix socket to connect to Postgres, set the socket path in the 'host' field and leave 'port' blank.
+  #   host: localhost
+  #   port: 5432
+  #   name: headscale
+  #   user: foo
+  #   pass: bar
+  #   max_open_conns: 10
+  #   max_idle_conns: 10
+  #   conn_max_idle_time_secs: 3600
+
+  #   # If other 'sslmode' is required instead of 'require(true)' and 'disabled(false)', set the 'sslmode' you need
+  #   # in the 'ssl' field. Refers to https://www.postgresql.org/docs/current/libpq-ssl.html Table 34.1.
+  #   ssl: false
+
+### TLS configuration
+#
+## Let's encrypt / ACME
+#
+# headscale supports automatically requesting and setting up
+# TLS for a domain with Let's Encrypt.
+#
+# URL to ACME directory
+acme_url: https://acme-v02.api.letsencrypt.org/directory
+
+# Email to register with ACME provider
+acme_email: ""
+
+# Domain name to request a TLS certificate for:
+tls_letsencrypt_hostname: ""
+
+# Path to store certificates and metadata needed by
+# letsencrypt
+# For production:
+tls_letsencrypt_cache_dir: /var/lib/headscale/cache
+
+# Type of ACME challenge to use, currently supported types:
+# HTTP-01 or TLS-ALPN-01
+# See: docs/ref/tls.md for more information
+tls_letsencrypt_challenge_type: HTTP-01
+# When HTTP-01 challenge is chosen, letsencrypt must set up a
+# verification endpoint, and it will be listening on:
+# :http = port 80
+tls_letsencrypt_listen: ":http"
+
+## Use already defined certificates:
+tls_cert_path: ""
+tls_key_path: ""
+
+log:
+  # Output formatting for logs: text or json
+  format: text
+  level: info
+
+## Policy
+# headscale supports Tailscale's ACL policies.
+# Please have a look to their KB to better
+# understand the concepts: https://tailscale.com/kb/1018/acls/
+policy:
+  # The mode can be "file" or "database" that defines
+  # where the ACL policies are stored and read from.
+  mode: file
+  # If the mode is set to "file", the path to a
+  # HuJSON file containing ACL policies.
+  path: ""
+
+## DNS
+#
+# headscale supports Tailscale's DNS configuration and MagicDNS.
+# Please have a look to their KB to better understand the concepts:
+#
+# - https://tailscale.com/kb/1054/dns/
+# - https://tailscale.com/kb/1081/magicdns/
+# - https://tailscale.com/blog/2021-09-private-dns-with-magicdns/
+#
+# Please note that for the DNS configuration to have any effect,
+# clients must have the `--accept-dns=true` option enabled. This is the
+# default for the Tailscale client. This option is enabled by default
+# in the Tailscale client.
+#
+# Setting _any_ of the configuration and `--accept-dns=true` on the
+# clients will integrate with the DNS manager on the client or
+# overwrite /etc/resolv.conf.
+# https://tailscale.com/kb/1235/resolv-conf
+#
+# If you want stop Headscale from managing the DNS configuration
+# all the fields under `dns` should be set to empty values.
+dns:
+  # Whether to use [MagicDNS](https://tailscale.com/kb/1081/magicdns/).
+  magic_dns: true
+
+  # Defines the base domain to create the hostnames for MagicDNS.
+  # This domain _must_ be different from the server_url domain.
+  # `base_domain` must be a FQDN, without the trailing dot.
+  # The FQDN of the hosts will be
+  # `hostname.base_domain` (e.g., _myhost.example.com_).
+  base_domain: "{{ headscale_base_domain }}"
+
+  # List of DNS servers to expose to clients.
+  nameservers:
+    global:
+      - {{ headscale_dns_for_connected_clients_1 }}
+      - {{ headscale_dns_for_connected_clients_2 }}
+
+      # NextDNS (see https://tailscale.com/kb/1218/nextdns/).
+      # "abc123" is example NextDNS ID, replace with yours.
+      # - https://dns.nextdns.io/abc123
+
+    # Split DNS (see https://tailscale.com/kb/1054/dns/),
+    # a map of domains and which DNS server to use for each.
+    split:
+      {}
+      # foo.bar.com:
+      #   - 1.1.1.1
+      # darp.headscale.net:
+      #   - 1.1.1.1
+      #   - 8.8.8.8
+
+  # Set custom DNS search domains. With MagicDNS enabled,
+  # your tailnet base_domain is always the first search domain.
+  search_domains: []
+
+  # Extra DNS records
+  # so far only A and AAAA records are supported (on the tailscale side)
+  # See: docs/ref/dns.md
+  extra_records: []
+  #   - name: "grafana.myvpn.example.com"
+  #     type: "A"
+  #     value: "100.64.0.3"
+  #
+  #   # you can also put it in one line
+  #   - { name: "prometheus.myvpn.example.com", type: "A", value: "100.64.0.3" }
+  #
+  # Alternatively, extra DNS records can be loaded from a JSON file.
+  # Headscale processes this file on each change.
+  # extra_records_path: /var/lib/headscale/extra-records.json
+
+# Unix socket used for the CLI to connect without authentication
+# Note: for production you will want to set this to something like:
+unix_socket: /var/run/headscale/headscale.sock
+unix_socket_permission: "0770"
+#
+# headscale supports experimental OpenID connect support,
+# it is still being tested and might have some bugs, please
+# help us test it.
+# OpenID Connect
+# oidc:
+#   only_start_if_oidc_is_available: true
+#   issuer: "https://your-oidc.issuer.com/path"
+#   client_id: "your-oidc-client-id"
+#   client_secret: "your-oidc-client-secret"
+#   # Alternatively, set `client_secret_path` to read the secret from the file.
+#   # It resolves environment variables, making integration to systemd's
+#   # `LoadCredential` straightforward:
+#   client_secret_path: "${CREDENTIALS_DIRECTORY}/oidc_client_secret"
+#   # client_secret and client_secret_path are mutually exclusive.
+#
+#   # The amount of time from a node is authenticated with OpenID until it
+#   # expires and needs to reauthenticate.
+#   # Setting the value to "0" will mean no expiry.
+#   expiry: 180d
+#
+#   # Use the expiry from the token received from OpenID when the user logged
+#   # in, this will typically lead to frequent need to reauthenticate and should
+#   # only been enabled if you know what you are doing.
+#   # Note: enabling this will cause `oidc.expiry` to be ignored.
+#   use_expiry_from_token: false
+#
+#   # Customize the scopes used in the OIDC flow, defaults to "openid", "profile" and "email" and add custom query
+#   # parameters to the Authorize Endpoint request. Scopes default to "openid", "profile" and "email".
+#
+#   scope: ["openid", "profile", "email", "custom"]
+#   extra_params:
+#     domain_hint: example.com
+#
+#   # List allowed principal domains and/or users. If an authenticated user's domain is not in this list, the
+#   # authentication request will be rejected.
+#
+#   allowed_domains:
+#     - example.com
+#   # Note: Groups from keycloak have a leading '/'
+#   allowed_groups:
+#     - /headscale
+#   allowed_users:
+#     - alice@example.com
+#
+#   # Optional: PKCE (Proof Key for Code Exchange) configuration
+#   # PKCE adds an additional layer of security to the OAuth 2.0 authorization code flow
+#   # by preventing authorization code interception attacks
+#   # See https://datatracker.ietf.org/doc/html/rfc7636
+#   pkce:
+#     # Enable or disable PKCE support (default: false)
+#     enabled: false
+#     # PKCE method to use:
+#     # - plain: Use plain code verifier
+#     # - S256: Use SHA256 hashed code verifier (default, recommended)
+#     method: S256
+#
+#   # Map legacy users from pre-0.24.0 versions of headscale to the new OIDC users
+#   # by taking the username from the legacy user and matching it with the username
+#   # provided by the OIDC. This is useful when migrating from legacy users to OIDC
+#   # to force them using the unique identifier from the OIDC and to give them a
+#   # proper display name and picture if available.
+#   # Note that this will only work if the username from the legacy user is the same
+#   # and there is a possibility for account takeover should a username have changed
+#   # with the provider.
+#   # When this feature is disabled, it will cause all new logins to be created as new users.
+#   # Note this option will be removed in the future and should be set to false
+#   # on all new installations, or when all users have logged in with OIDC once.
+#   map_legacy_users: false
+
+# Logtail configuration
+# Logtail is Tailscales logging and auditing infrastructure, it allows the control panel
+# to instruct tailscale nodes to log their activity to a remote server.
+logtail:
+  # Enable logtail for this headscales clients.
+  # As there is currently no support for overriding the log server in headscale, this is
+  # disabled by default. Enabling this will make your clients send logs to Tailscale Inc.
+  enabled: false
+
+# Enabling this option makes devices prefer a random port for WireGuard traffic over the
+# default static port 41641. This option is intended as a workaround for some buggy
+# firewall devices. See https://tailscale.com/kb/1181/firewalls/ for more information.
+randomize_client_port: false
diff --git a/playbooks/roles/outbound/templates/data/.gitkeep b/playbooks/roles/outbound/templates/data/.gitkeep
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/playbooks/roles/outbound/templates/data/.gitkeep
diff --git a/playbooks/roles/outbound/templates/docker-compose.yml b/playbooks/roles/outbound/templates/docker-compose.yml
new file mode 100644
index 0000000..c644ca4
--- /dev/null
+++ b/playbooks/roles/outbound/templates/docker-compose.yml
@@ -0,0 +1,39 @@
+---
+
+services:
+  headscale:
+    image: headscale/headscale:stable-debug # until something better comes along with wget or i make my own dockerfile...
+    pull_policy: always
+    restart: unless-stopped
+    command: serve
+    volumes:
+      - ./config:/etc/headscale
+      - ./data:/var/lib/headscale
+    networks:
+      - proxy
+    environment:
+      - VIRTUAL_HOST={{ headscale_host }}
+      - VIRTUAL_PORT={{ headscale_port }}
+      - LETSENCRYPT_HOST={{ headscale_host }}
+    healthcheck:
+      test: ["CMD", "wget", "-qO", "-", "http://localhost:8080/health"] 
+      interval: 10s
+      timeout: 5s
+      retries: 3
+
+  headscale-ui:
+    image: ghcr.io/gurucomputing/headscale-ui:latest
+    pull_policy: always
+    restart: unless-stopped
+    networks:
+      - proxy
+    environment:
+      - VIRTUAL_HOST={{ headscale_host }}
+      - VIRTUAL_PORT={{ headscale_port }}
+      - LETSENCRYPT_HOST={{ headscale_host }}
+      - VIRTUAL_PATH=/web/ 
+      - VIRTUAL_DEST=/
+
+networks:
+  proxy:
+    external: true